Paver Sealing Tips
Professional paver sealing in Central Florida typically costs between $1.50 and $3.00 per square foot in 2026 — here's exactly what drives that price and how to avoid overpaying for subpar results.
Chance Sixma
🗓️
Feb 11, 2026
📖
9 Min Read
🔄
Updated -
Feb 11, 2026
A paver driveway in Deltona, FL after Castle Clean & Seal's complete restoration and sealing — the kind of results Central Florida homeowners can expect.
Key Takeaway
Professional paver sealing in Central Florida costs between $1.50 and $3.00 per square foot in 2026, with most homeowners paying $750 to $2,500 for a complete clean-and-seal project. Castle Clean & Seal's Castle Shield 4-Step System includes weed treatment, pressure cleaning, joint stabilization, and 2–3 coats of premium water-based sealer — all factored into that price. The biggest cost factors are total square footage, current paver condition, and whether a previous low-quality sealer needs to be stripped first.
HOW MUCH DOES PAVER SEALING COST IN FLORIDA?
Professional paver sealing in Central Florida ranges from $1.50 to $3.00 per square foot in 2026, depending on the condition of your pavers, total square footage, and the quality of sealer used. For a typical driveway or patio between 500 and 1,000 square feet, most homeowners in Deltona, Orlando, Sanford, and Lake Mary pay between $750 and $2,500 for a complete clean-and-seal service.
That price should cover far more than just spraying down a coat of sealer. At Castle Clean & Seal, our pricing includes weed and mold treatment, full pressure cleaning with a high volume-low pressure cleaning system, joint sand stabilization, and 2–3 coats of premium water-based sealer. If a company is quoting you significantly less than $1.50 per square foot, ask what's being skipped — because the answer is almost always "the steps that make it last."
We've completed over 1,135 paver restoration projects across Volusia, Seminole, and Orange Counties, and one thing we've learned is that cutting corners on preparation is the number one reason paver sealing fails in Florida's climate.
WHAT FACTORS AFFECT PAVER SEALING COST?
The cost of paver sealing in Central Florida isn't one-size-fits-all. Several factors influence your final price, and understanding them helps you compare quotes accurately. Here's what moves the needle most.
Total Square Footage
This is the biggest cost driver. The more pavers you need sealed, the more material and labor are required. However, larger projects often have a lower per-square-foot rate because costs are spread across more area. A 400-square-foot pool deck might run $2.50 per square foot, while a 1,200-square-foot driveway could come in closer to $1.50 per square foot.
Current Paver Condition
Pavers that haven't been maintained in years require significantly more preparation. Heavy weed growth between joints, thick layers of mold and algae, or efflorescence (that white, chalky residue) all add time and materials to the job. A well-maintained patio that was last sealed two years ago costs less to reseal than a neglected driveway that hasn't been touched in seven years.
Previous Sealer Quality
This is one that catches a lot of Central Florida homeowners off guard. If a previous company applied a low-quality solvent-based sealer — the kind that turns white and peels in Florida's humidity — that old sealer often needs to be chemically stripped before new sealer can bond properly. Stripping adds cost, but skipping it means the new sealer will fail just as fast as the old one.
Type of Sealer Used
Not all sealers are equal, and the type used directly impacts both cost and longevity. Water-based sealers are the professional standard for Florida's climate because they allow moisture to escape through the paver surface, preventing the white hazing that plagues solvent-based products. Premium water-based sealers perform significantly better in our 80%+ humidity environment.
Surface Type
Brick pavers, travertine, concrete pavers, and natural stone each have different porosity levels and sealing requirements. Limestone, for example, requires a penetrating sealer rather than a topical film-forming sealer, which changes both the product used and the application process.
This Deltona driveway had over five years of weed growth, mold buildup. After our full Castle Shield 4-Step System — the pavers looked better than the day they were installed. Total project: 850 square feet.
WHAT DOES PROFESSIONAL PAVER SEALING ACTUALLY INCLUDE?
A legitimate paver sealing price should cover a complete restoration process, not just the sealer application. Here's what Castle Clean & Seal's Castle Shield 4-Step System includes — and what you should expect from any professional.
PAVER SEALING COST BY PROJECT TYPE IN CENTRAL FLORIDA
To give you a more specific idea of what to budget, here's what we typically see across our projects in Deltona, Sanford, Lake Mary, Oviedo, Winter Springs, Altamonte Springs, DeLand, Daytona Beach, Port Orange, Orlando, and Winter Park.
Driveway Paver Sealing Cost
Most Central Florida driveways range from 600 to 1,200 square feet. At $1.50–$2.50 per square foot, homeowners typically pay $900 to $3,000, depending on condition and size. Driveways take the most abuse — vehicle traffic, oil stains, sun exposure — so they often need the most preparation.
Patio Paver Sealing Cost
Patios are usually 300 to 800 square feet and run $450 to $2,000. Patios in covered or partially shaded areas tend to have more mold and algae growth than sun-exposed driveways, which can affect pricing.
Pool Deck Paver Sealing Cost
Pool decks bring unique challenges. Chlorinated water, constant moisture, and sun exposure create a harsh environment for pavers & natural stone. Expect to pay $1.75–$3.00 per square foot for pool deck sealing. Non-slip sealer additives are also recommended around travertine pool areas, which can add a small amount to the cost.
Walkway and Pathway Sealing Cost
Walkways are typically smaller (100–400 square feet) and run $200 to $800. However, the per-square-foot rate tends to be higher on very small projects because of minimum service charges that cover mobilization, materials, and equipment.
DIY PAVER SEALING VS. HIRING A PROFESSIONAL IN FLORIDA
You can buy paver sealer at Home Depot or Lowe's for about $100–$150 per 5-gallon bucket. At first glance, DIY looks like a massive savings — but here's what that price doesn't include.
Equipment rental runs $150–$400 per day for a quality pressure washer with the right volume output. Then you need joint stabilizing sand ($10–$27 per bag, and most driveways need 2–7 bags), algaecide treatment ($40–$80) depending on what algaecide your using, and application tools like sprayers and rollers ($50–$100).
Add it all up and DIY materials for a typical driveway cost $500–$1,000 — before your time. A full driveway project takes 2–3 full days of hard physical labor for someone without professional equipment depending on the size.
The bigger risk is doing it wrong. Applying sealer over dirty pavers traps stains permanently. Using too much pressure damages the surface. Applying sealer in the wrong weather conditions (too cold, too hot, rain in the forecast) causes it to turn white or peel within weeks. These mistakes often cost more to fix than hiring a professional would have cost in the first place.
At Castle Clean & Seal, roughly 20% of our projects involve correcting failed DIY sealing jobs — stripping the bad sealer, repairing joint sand, and starting from scratch. That correction work adds $1,000–$3,500 to the project cost compared to doing it right the first time.
The math is clear: professional paver sealing in Central Florida costs a similar amount to DIY when you factor in equipment, materials, and the very real risk of costly mistakes — and the results last significantly longer.
HOW TO GET THE BEST VALUE ON PAVER SEALING
Getting the best value doesn't mean finding the cheapest price — it means getting the longest-lasting results for your money. Here's how to make sure you're comparing apples to apples when getting paver sealing quotes in Central Florida.
Get at least three quotes from companies that specifically focus on paver restoration. General pressure washing companies often offer sealing as an add-on, but they rarely invest in the preparation steps that make sealer last. Ask every company the same questions: What brand of sealer do you use? How many coats? Do you treat for mold and weeds before cleaning? Do you install a joint-stabilizing sand?
Ask about warranties. A company that offers a warranty on their work is a company that believes in their process. At Castle Clean & Seal, we offer an 18-month warranty with our Premium package and a 30-month warranty with our Platinum package because our Castle Shield 4-Step System is designed to outlast the competition.
Check reviews on Google, Yelp, and Nextdoor. Look specifically for reviews that mention longevity — not just how good it looked on day one, but how it held up 6, 12, or 18 months later. With over 250 five-star reviews, Castle Clean & Seal has the track record to back up our pricing.
At Castle Clean & Seal, we've refined our Castle Shield 4-Step System over 15+ years and 1,135+ projects across Central Florida. When you're ready to protect your pavers the right way and get real pricing for your specific project, request your free same-day quote or call us at (386) 215-5461.
READY TO PROTECT YOUR INVESTMENT?
GET YOUR FREE SAME-DAY
QUOTE
Join 1,135+ happy Central Florida homeowners. Licensed & insured.
Takes 30 seconds · Same-day response · No obligation
CS
Chance Sixma
Owner · Castle Clean & Seal
Keep Reading